Nouveau support siège vibrant FORCEFEEL en préco

Salle dedieé aux péripheriques : Joystick, palloniers, Track-Ir
Avatar de l’utilisateur

axurit
Apprenti-Mécano
Apprenti-Mécano
Messages : 314
Inscription : 19 décembre 2006

Re: Nouveau support siège vibrant FORCEFEEL en préco

#101

Message par axurit »

Alors personne n'a encore déballé son nouveau joujoux ??
Avatar de l’utilisateur

Flow
Pilote Philanthrope
Pilote Philanthrope
Messages : 2983
Inscription : 20 février 2018

Re: Nouveau support siège vibrant FORCEFEEL en préco

#102

Message par Flow »

Je pense que rien n’a encore été expédié.
Je n’ai rien reçu tout du moins, ni produit, ni avis d’expédition...
13600KF • 4080 • FSSB R3 Lighting • Varjo Aero • 35ppd ♥
Image
Avatar de l’utilisateur

phoenix
Pilote Philanthrope
Pilote Philanthrope
Messages : 14879
Inscription : 05 août 2001

Re: Nouveau support siège vibrant FORCEFEEL en préco

#103

Message par phoenix »

Pareil pour moi
Avatar de l’utilisateur

Topic author
OBT~Voss
Mécano au sol
Mécano au sol
Messages : 432
Inscription : 11 juillet 2009

Re: Nouveau support siège vibrant FORCEFEEL en préco

#104

Message par OBT~Voss »

Je matte tous les jours leur site, mais ils ont ( encore ) pris du retard, les livraisons devraient démarrer lentement cette semaine, pour finir fin octobre si j'ai bien compris, pour cause de déménagement de site qui ralenti le processus...

Maintenant il ne reste plus qu'à faire le forcing chez Jason pour avoir cette satanée télémétrie que beaucoup attendent :...:
Avatar de l’utilisateur

Flow
Pilote Philanthrope
Pilote Philanthrope
Messages : 2983
Inscription : 20 février 2018

Re: Nouveau support siège vibrant FORCEFEEL en préco

#105

Message par Flow »

Je leur ai écris pour avoir une date d'expé. Je vous tiens au courant s'ils répondent.
13600KF • 4080 • FSSB R3 Lighting • Varjo Aero • 35ppd ♥
Image
Avatar de l’utilisateur

Flow
Pilote Philanthrope
Pilote Philanthrope
Messages : 2983
Inscription : 20 février 2018

Re: Nouveau support siège vibrant FORCEFEEL en préco

#106

Message par Flow »

Bon réponse reçue à l'instant, ce n'est pas pour tout de suite je pense.
Ca fait peur qu'ils aient des problèmes électroniques je trouve ....
We are sorry for the delay, but please note that we had always assumed the completion of the product delivery based on the information from the manufacturer. For example, this week the performance of our partner factory was affected by the national holidays in China. Therefore, they had requested from us another 5 to 10 days for the final products assembly.
Based on the sample we previously showed here, we had to make some minor changes to the motors positions to increase the user comfort. This change will not affect the outer design. In the meantime, we were also investigating a problem that appeared with the electronic circuit boards from one of the first batches ordered.
In the next week, you can look forward to the final product photos and the product video, which will be available on our website.
13600KF • 4080 • FSSB R3 Lighting • Varjo Aero • 35ppd ♥
Image
Avatar de l’utilisateur

Topic author
OBT~Voss
Mécano au sol
Mécano au sol
Messages : 432
Inscription : 11 juillet 2009

Re: Nouveau support siège vibrant FORCEFEEL en préco

#107

Message par OBT~Voss »

Bah ça va laisser du temps pour relancer le bourrage de crâne chez Jason pour lâcher du lest sur la télémétrie :hum:

DAvidMyst
Nouvelle Recrue
Nouvelle Recrue
Messages : 23
Inscription : 11 octobre 2018

Re: Nouveau support siège vibrant FORCEFEEL en préco

#108

Message par DAvidMyst »

salut, voila le mien que j'ai depuis un moment et je suis toujours content sur DCS et voiture :)

Groupe Dcs Attack Fr Facebook
Discord pour jouer https://discord.gg/vFfpKK6
Le site internet http://dcs-attack-fr.forumactif.com
Avatar de l’utilisateur

Flow
Pilote Philanthrope
Pilote Philanthrope
Messages : 2983
Inscription : 20 février 2018

Re: Nouveau support siège vibrant FORCEFEEL en préco

#109

Message par Flow »

C'est pas un forcefeel :)
13600KF • 4080 • FSSB R3 Lighting • Varjo Aero • 35ppd ♥
Image
Avatar de l’utilisateur

falcon29
Pilote Philanthrope
Pilote Philanthrope
Messages : 569
Inscription : 07 septembre 2012

Re: Nouveau support siège vibrant FORCEFEEL en préco

#110

Message par falcon29 »

Mail reçu

Dear,


This is to update you on the progress of the ForceFeel production. Based on the sample we showed in the previous newsletter, we had to make some minor changes to the motors positions to increase the user comfort. This change will not affect the outer design. In the meantime, we were also investigating a problem that appeared with the electronic circuit boards from one of the first batches ordered.

On Saturday, October 20th, the first batch of 45 pieces will be completed.
The delivery to our EU warehouse will take another six days. Once the stocks reach our warehouse, we will begin the shipping as soon as possible.

We strongly believe the next batch of 50 another pieces and others will soon follow after. The shipping to our customers will be done in several waves. We will keep you updated once we receive an update from the factory.

We understand and share the anger some of you may feel following our previous delay announcements. Sometimes things don't go our way. We had always assumed the completion of the product delivery based on the information from the manufacturer. But having waited a long time from the delays we decided to offer both SimShaker software packages to the first 200 pre-orders (for your confirmation, please use the provided email contact).

Thank you for your support,


Tomas Jandecka
Owner
Avatar de l’utilisateur

Topic author
OBT~Voss
Mécano au sol
Mécano au sol
Messages : 432
Inscription : 11 juillet 2009

Re: Nouveau support siège vibrant FORCEFEEL en préco

#111

Message par OBT~Voss »

Yes je viens de leur renvoyer un mail pour confirmer ( comme demandé ) mon intérêt pour les 2 versions du simshaker ( pas trop compris l'intérêt mais bon ... )

Allez encore qqes jours à attendre :yes:

Maintenant si qqn a des talents de coding pour nous pondre une interface qui gère la télémétrie il a toute mon éternelle gratitude :hum:
Avatar de l’utilisateur

Marc_63
Pilote Philanthrope
Pilote Philanthrope
Messages : 2961
Inscription : 10 décembre 2011

Re: Nouveau support siège vibrant FORCEFEEL en préco

#112

Message par Marc_63 »

Pour l’Intérêt c'est que tu peux avoir en plus la version "SimShaker-Wheel" gratos ou l'autre version avions "SimShaker-Wings" si tu utilises aussi Falcon BMS, War Thunder, AeroFly FS 2.

Sur la version "SimShaker for Aviators" ils ne sont pas supportés. ;)
Ryzen 7 5800x3d, Asus Tuf Gaming 4090, Ram 32 GB, Pimax Crystal, Grip Warthog + base Virpil WarBRD, Throttle Virpil T-50CM3, Collectif Virpil, palonnier Thrustmaster TPR.
Avatar de l’utilisateur

jim
Pilote Philanthrope
Pilote Philanthrope
Messages : 136
Inscription : 03 février 2005

Re: Nouveau support siège vibrant FORCEFEEL en préco

#113

Message par jim »

Bonsoir. Email reçu aussi et confirmé...nous sommes dans la dernière ligne droite!!
i7-860 OC 3,9 GHz - GA P55A - 16GB DDR3 1600 - GTX 1060 6G - SSD 250GB+SSD 500GB - Win10 64 - VKB GF MCG - Cougar throttle - TM TPR - Trackir5
Avatar de l’utilisateur

nico23/2
Elève Pilote
Elève Pilote
Messages : 647
Inscription : 31 juillet 2004

Re: Nouveau support siège vibrant FORCEFEEL en préco

#114

Message par nico23/2 »

Bonjour,
noël arrivant je m'intéresse, pour mon simpit, à cet objet.
J'ai regardé sur le site mais il faut le precommander. Est-ce fiable et savez vous, si je le commande, dans quel délai je vais le recevoir?

Merci à tous
Image ImageImage
Avatar de l’utilisateur

phoenix
Pilote Philanthrope
Pilote Philanthrope
Messages : 14879
Inscription : 05 août 2001

Re: Nouveau support siège vibrant FORCEFEEL en préco

#115

Message par phoenix »

Pour les délais, c'est difficile à dire, vu que nous attendons les pré commandes du lancement. Les personnes qui interviennent sont des gens qui ont pré commandé alors que ce n'était qu'un projet. Il semble que l'on touche au but. Donc pour ceux qui commandent maintenant, je ne sais pas. Cela dépendra de leur outil de production.
Avatar de l’utilisateur

Topic author
OBT~Voss
Mécano au sol
Mécano au sol
Messages : 432
Inscription : 11 juillet 2009

Re: Nouveau support siège vibrant FORCEFEEL en préco

#116

Message par OBT~Voss »

Vu sur leur page face de bouc , les 40 premiers exemplaires sont dans les cartons prêts à être envoyé :notworthy
Avatar de l’utilisateur

Flow
Pilote Philanthrope
Pilote Philanthrope
Messages : 2983
Inscription : 20 février 2018

Re: Nouveau support siège vibrant FORCEFEEL en préco

#117

Message par Flow »

Mince, je suis #71 :(
Espérons le prochain envoi !
13600KF • 4080 • FSSB R3 Lighting • Varjo Aero • 35ppd ♥
Image
Avatar de l’utilisateur

Jallie
Légende volante
Légende volante
Messages : 17004
Inscription : 02 novembre 2002

Re: Nouveau support siège vibrant FORCEFEEL en préco

#118

Message par Jallie »

Voss a écrit :
jeu. oct. 25, 2018 1:07 pm
Vu sur leur page face de bouc , les 40 premiers exemplaires sont dans les cartons prêts à être envoyé :notworthy
mince je suis N° 47 .... va falloir attendre qq semaines de plus alors :jerry:
        AMD 3700 X - DDR4 32GB 3400 ghz - RTX 3080 ti   -  SoundBlaster Omni 5.1   
 VR PIMAX  Crystal   Chassis JCL-V2  bi-Simu + Simshakers x4 AURA .
      simflight -->  VKB Gunfighter-Pro  + Saitek throtle + rudder VKB MK-IV + Cougar FCC + Winwing TQS
        simrace -->  Volant Fanatec DD1 + pédalier HPP (JVB)  + Boutons box ( DsD + Saitek box  )
                
Avatar de l’utilisateur

Flow
Pilote Philanthrope
Pilote Philanthrope
Messages : 2983
Inscription : 20 février 2018

Re: Nouveau support siège vibrant FORCEFEEL en préco

#119

Message par Flow »

J'ai commandé mon ForceFeel il y a 230 jours (33 semaines / 63% d'une année, histoire de faire des maths), et toujours aucune nouvelle.
J'espère l'avoir avant Noël :)
13600KF • 4080 • FSSB R3 Lighting • Varjo Aero • 35ppd ♥
Image
Avatar de l’utilisateur

phoenix
Pilote Philanthrope
Pilote Philanthrope
Messages : 14879
Inscription : 05 août 2001

Re: Nouveau support siège vibrant FORCEFEEL en préco

#120

Message par phoenix »

Des nouvelles, mais j'avoue que ça me fait bizarre de lire que le hardware est envoyé alors que le soft n'est pas finalisé. :busted_re
SimShaker Wheels & Wings
We are working hard to bring the SimShaker Wheels and Wings compatibility with ForceFeel as soon as possible. Andrey, the SimShaker developer, has already made the pre-arrangement of integration in SimShaker, but he will need to check the physical product in order to trigger the integration. We think it should not take long to release the beta version, we expect within 5-10 days.

For the current customers, who have already received the ForceFeel, we offer to extend the standard 14 days return period until the software integration will be solved, for you to test the ForceFeel product in its all functions.
Sinon, pour les européens, ça arrive. Il faut compter 30 jours pour que ça arrive en europe, car ça vient par bateau.
Is the initial production run completed?
Yes, the ForceFeels are produced in enough quantity to fulfil the rest of pre-orders and future orders. As we have mentioned earlier, most of the products will be shipped to our warehouse via the ocean freight. This batch is already on the way, it will take approximately 30 days to reach our European port. We will inform you once we will know the exact date of the delivery.
Avatar de l’utilisateur

Flow
Pilote Philanthrope
Pilote Philanthrope
Messages : 2983
Inscription : 20 février 2018

Re: Nouveau support siège vibrant FORCEFEEL en préco

#121

Message par Flow »

Avec un peu de chance on l’aura pour Noël :)
13600KF • 4080 • FSSB R3 Lighting • Varjo Aero • 35ppd ♥
Image
Avatar de l’utilisateur

Topic author
OBT~Voss
Mécano au sol
Mécano au sol
Messages : 432
Inscription : 11 juillet 2009

Re: Nouveau support siège vibrant FORCEFEEL en préco

#122

Message par OBT~Voss »

Toujours personne qui fait vibrer son coussin ? :crying:

ça manque de comm quand même , ça fait 2 semaines que leurs cartons sont arrivés dans leur warehouse et qu'ils doivent dispatcher ....

Ah moins que leurs premiers clients soients au Groenland je ne comprends pas ces délais et je m'impatiente ...
Avatar de l’utilisateur

Flow
Pilote Philanthrope
Pilote Philanthrope
Messages : 2983
Inscription : 20 février 2018

Re: Nouveau support siège vibrant FORCEFEEL en préco

#123

Message par Flow »

Pareil. Je n’ai absolument rien entendu.
13600KF • 4080 • FSSB R3 Lighting • Varjo Aero • 35ppd ♥
Image
Avatar de l’utilisateur

jim
Pilote Philanthrope
Pilote Philanthrope
Messages : 136
Inscription : 03 février 2005

Re: Nouveau support siège vibrant FORCEFEEL en préco

#124

Message par jim »

Bonjour, de même...pas de nouvelles!
i7-860 OC 3,9 GHz - GA P55A - 16GB DDR3 1600 - GTX 1060 6G - SSD 250GB+SSD 500GB - Win10 64 - VKB GF MCG - Cougar throttle - TM TPR - Trackir5
Avatar de l’utilisateur

phoenix
Pilote Philanthrope
Pilote Philanthrope
Messages : 14879
Inscription : 05 août 2001

Re: Nouveau support siège vibrant FORCEFEEL en préco

#125

Message par phoenix »

Vous n'avez pas eu le mail, c'est partie par bateau et ils estiment à 30 jours le temps pour rejoindre leur entrepôt en Europe. Donc à mon avis, on devrait avoir des infos vers mi décembre, voir début janvier.
Répondre

Revenir à « salle: Periphériques: Hotas, Joysticks, Track-IR »